Circuit breakers can incorporate residual-current protection

circuit breakers
Designed for large commercial and industrial loads, Series G moulded-case circuit breakers from Eaton Electric
The Series G range of enclosed moulded-case circuit breakers from Eaton Electric is suitable for the protection and control of large commercial and industrial loads. The range extends from 63 to 630A in single-pole, 3-pole and 4-pole variants. There are also versions with integral residual-current protection. These MCCBs are suitable for applications where long cable runs and/or high earth-fault impedances require residual-current protection to satisfy the requirements of the Wiring Regulations. Sensitivity can be adjusted from 30 mA to 10 A. The time delay can be adjusted from instantaneous to0 a second, providing for discrimination with other residual-current devices. The RCDs have to alarm contacts as standard. One operates at 50% trip current and the other at 100%. Two LEDs indicate that power is on and the earth-leakage current is more than 50% of full trip current. Enclosures are of 1.5 mm sheet steel with a 2 mm cover and epoxy-polyester finish. Most enclosures have gland plates and knockouts. Neutral links can be removed for ease of commissioning.
For more information on this story, click here:Jan 08, 163
Related links:
Related articles:



modbs tv logo

LG supports fast-moving WeWork project

How LG Air Conditioning helped WeWork London achieve a fast project with great results.

MBStv at the BESA National Conference 2019

The BESA National Conference 2019 saw over 200 delegates gather to discuss the industry’s challenges and opportunities. MBStv was there to capture it all.