Hattersley press-fit valves are compatible with Geberit Mapress

Hattersley, Geberit Mapress, valves, press fit

Hattersley has introduced a range of press-fit valves with integrated adaptors for the Geberit Mapress system. Comprising a ball, balancing, strainer and check valve, this range is suitable for use with copper from 12 to 108 mm and Geberit Mapress stainless- and carbon-steel tubing. By supplying the valve and adaptors assembled and tested as one unit, the number of purchased components and joints required on site can be halved — simplifying purchasing, reducing costs, shortening installation time and reducing the risk of a leak.

These press-fit valves are particularly suitable for pre-fabrication.

These Hattersley valves have parallel threads to achieve better resistance to bending forces and much greater reliability.

The O rings in these joints have three defined leak paths so unpressed joints can be easily identified and the joint completed without draining down the system.

A white foil indicator on the pressing drops off when the press-fitting tool has been used.

For more information on this story, click here:  March 2012, 178
Related links:
Related articles:

modbs tv logo

Wellbeing and building services

Building services have a significant part to play in improving the wellbeing of occupants in offices. 

Part 2: Holding onto specifications

Alan Jamieson discusses how to keep specifications intact from the design to the completion, a common challenge in M&E engineering.